Overview

The TMH16(Z3)-SY furnace is a bench mounted tube furnace ideal for most general laboratory thermal processing applications.

Heating elements

High Grade Silicon Carbide Rods arranged in 3 controlled zones.

Highlights

Standard Features
Optional Features
Downloads

The TMH16(Z3)-SY furnaces are designed to give a longer uniform centre zone temperature than that of the single zone tube furnace models.
All TMH16(Z3)-SY models are controlled by retransmission of set point from the centre zone controller to the end zone controllers.
Independent control of each zone is also available.
This system provides a longer uniform zone temperature than that achieved by the use of single zone furnace of the same length
A work tube is not supplied as an integral part of the furnace and therefore needs to be ordered with the furnace as it is an essential accessory.
Protective outer mesh covers for improved operator safety.
Low thermal mass insulation used throughout for maximum thermal efficiency and stability
'R' Type Thermocouples are used in these furnaces.
High end Microprocessor PID controller.
Horizontal models are supplied as standard with controls in the base.

Work tubes of various materials, lengths and diameters for use in the furnace.
The work tubes are available for containment of atmosphere or protection against process contaminants.
A variety of triple flange gas tight end seals for work tubes to allow processing under Vacuum or gas atmospheres.
Over Temperature protection controllers.
Multi segment, multi program storage controllers.
Thermal Radiation Screens/Shields.

Specifications

Model	Max Temp (°C)	Max Cont (°C)	Tube Diameter (ID) (mm)	Heated Length (mm)	Nominal Power (kW)	Volts	Phase	External Dimensions (mm) H x W x D	Net Wt. (kg)	Worktubes (ID x Length) (mm) Short	Worktubes (ID x Length) (mm) Long
TMH16(Z3)/50/450-SY	1600	1550	50	450	4.0	400	3	715x1000x460	60	50x1050	50x1200
TMH16(Z3)/75/450-SY	1600	1550	75	450	6.0	400	3	715x1000x460	60	75x1050	75x1350
TMH16(Z3)/50/610-SY	1600	1550	50	610	6.0	400	3	825x1150x562	70	50x1200	75x1500
TMH16(Z3)/75/610-SY	1600	1550	75	610	6.0	400	3	825x1150x562	70	75x1200	75x1500
TMH16(Z3)/90/610-SY	1600	1550	90	610	9.0	400	3	825x1150x562	70	90x1200	90x1500

Note 1:

The work tube is not supplied as an integral part of the furnace and therefore needs to be purchased with the order as it is an essential accessory.

Note 2:

For Multi-zone Tube furnaces, we can supply:
1. Two or more zones.
2. Other temperatures that are not specified
3. Other Tube diameters and lengths that are not specified.