Overview

The TMV18(Z3) furnace is a vertical-mounted tube furnace with a separate control console, ideal for most general laboratory thermal processing applications.

Heating Elements

Molybdenum tungsten Disilicide heating elements are mounted along the front and rear walls of the furnace chamber.

Highlights

Standard Features
Optional Features
Downloads

The TMV18(Z3) furnaces are designed to give a longer uniform centre zone temperature than that of the single zone tube furnace models of the same length.
All TMV18(Z3) models are controlled by retransmission of set point from the centre zone controller to the end zone controllers.
A work tube is not supplied as an integral part of the furnace and therefore needs to be ordered with the furnace as it is an essential accessory.
Protective outer mesh covers for improved operator safety.
Low thermal mass insulation used throughout for maximum thermal efficiency and stability.
'B' type Thermocouples are used in these furnaces.
Over temperature protection is included in the standard specification.
High end Microprocessor PID controller.
Horizontal models are supplied as standard with controls in the base.
Single, Phase angle fired thyristor unit in conjunction with a low voltage secondary winding isolating transformer providing the correct operating parameters for the heating elements.

Work tubes of various materials, lengths and diameters for use in the furnace.
The work tubes are available for containment of atmosphere or protection against process contaminants.
A variety of triple flange gas tight end seals for work tubes to allow processing under gas atmospheres.
Multi segment, multi program storage controllers.
Thermal Radiation Screens/Shields.

Specifications

Model	Max Temp (°C)	Max Cont (°C)	Tube Diameter (ID) (mm)	Heated Length (mm)	Nominal Power (kW)	Volts	Phase	Ext Dimensions (mm) H x W x D	Net Wt. (kg)	Worktubes (ID x Length) mm Short	Worktubes (ID x Length) mm Long
TMV18(Z3)/50/610	1800	1750	50	610	8.5	400	3+N	900x800	-	50x1200	50x1350
TMV18(Z3)/75/610	1800	1750	75	610	8.5	400	3+N	900x800	-	75x1200	75x1350

Note 1:

The work tube is not supplied as an integral part of the furnace and therefore needs to be purchased with the order as it is an essential accessory.

Note 2:

For Multi-zone Tube furnaces, we can supply:
1. Two or more zones.
2. Other temperatures that are not specified
3. Other Tube diameters and lengths that are not specified.