Overview

The TMV17(Z3) furnace is a vertical-mounted tube furnace with a separate control console, ideal for most general laboratory thermal processing applications.

Heating Elements

High-end Molybdenum Disilicide single loop elements mounted along the front and rear walls of the furnace chamber.

Highlights

Standard Features
Optional Features
Downloads

The TMV17(Z3) furnaces are designed to give a longer uniform centre zone temperature than that of the single zone tube furnace models of the same length.
All TMV17(Z3) models are controlled by retransmission of set point from the centre zone controller to the end zone controllers.
Low thermal mass insulation used throughout for maximum thermal efficiency and stability.
'B' type Thermocouples are used in these furnaces.
A work tube is not supplied as an integral part of the furnace and therefore needs to be ordered with the furnace as it is an essential accessory.
High end Microprocessor PID controller.
Over temperature protection is included in the standard specification.
Horizontal models are supplied as standard with controls in the base.
Single, Phase angle fired thyristor unit in conjunction with a low voltage secondary winding isolating transformer providing the correct operating parameters for the heating elements.

Work tubes of various materials, lengths and diameters for use in the furnace.
The work tubes are available for containment of atmosphere or protection against process contaminants.
A variety of triple flange gas tight end seals for work tubes to allow processing under vacuum or gas atmospheres.
Multi segment, multi program storage controllers.
Thermal Radiation Screens/Shields.

Specifications

Model	Max Temp (°C)	Max Cont (°C)	Tube Diameter (ID) (mm)	Heated Length (mm)	Nominal Power (kW)	Volts	Phase	Ext Dimensions (mm) H x W x D	Net Wt. (kg)	Worktubes (ID x Length) (mm) Short	Worktubes (ID x Length) (mm) Long
TMV17(Z3)/50/610	1700	1650	50	610	8.0	400	3+N	900x800	-	50x1200	50x1350
TMV17(Z3)/75/610	1700	1650	75	610	8.0	230	3+N	900x800	-	75x1200	75x1350

Note 1:

The work tube is not supplied as an integral part of the furnace and therefore needs to be purchased with the order as it is an essential accessory.

Note 2:

For Multi-zone Tube furnaces, we can supply:
1. Two or more zones.
2. Other temperatures that are not specified
3. Other Tube diameters and lengths that are not specified.