The TSV17 furnace is a vertical tube furnace with a separate control panel for most common laboratory thermal processing applications.

High quality heating elements made of Molybdenum Disilicide single loop arranged along the chamber front and rear walls

Highlights

These furnaces are constructed using high grade insulation materials throughout for rapid response rates and maximum thermal efficiency and stability.
This furnace design requires the use of a separate work tube of a grade suitable for the maximum temperature rating of the respective furnace model.
A work tube is not supplied as an integral part of the furnace and therefore needs to be ordered with the furnace as it is an essential accessory.
'B' type Thermocouple is used in these furnaces.
Over temperature protection is fitted as a standard.
High end Microprocessor PID controller is used in these models.
These models are supplied as separate control console remote from furnace, separated by two meters of flexible inter-connecting cable.
Phase angle fired thyristor unit operating in conjunction with a low voltage secondary isolating transformer providing the correct operating parameters for the heating elements.

Work tubes of various materials, lengths and diameters for use in the furnace.
The work tubes are available for containment of atmosphere or protection against process contaminants.
A variety of trile flange gas tight end seals for work tubes to allow processing under gas atmospheres.
Multi segment, multi program storage controllers.
Thermal Radiation Plugs/Screens/Shields.

Specifications

Model	Max Temp (°C)	Max Cont (°C)	Tube Diameter (ID) (mm)	Heated Length (mm)	Nominal Power (kW)	Volts	Phase	External Dimensions (mm) H x W x D	Net Wt. (kg)	Worktubes (ID x Length) (mm) Short	Worktubes (ID x Length) (mm) Long
TSV17/75/300	1700	1650	75	300	4.5	230	1	910x650	-	75x1050	75x1350
TSV17/75/450	1700	1650	75	450	5.5	230	1	1060x650	-	75x1200	75x1500
TSV17/75/600	1700	1650	75	600	7.0	230	1	1210x650	-	75x1350	75x1650

Custom Designed For all Tube furnaces, Sylab Scientific manufactures under the collaboration with Elite. Please contact us with your requirement.
The work tube is not supplied as an integral part of the furnace and therefore needs to be purchased with the order as it is an essential accessory.