The TSV175 furnace is a floor mounted tube furnace ideal for most general laboratory thermal processing applications.

TSV175 models are heated by lanthanum chromite elements suspended parallel to the work tube.

Highlights

These furnaces are constructed using high grade insulation materials throughout for rapid response rates and maximum thermal efficiency and stability.
This furnace design requires the use of a separate work tube of a grade suitable for the maximum temperature rating of the respective furnace model.
A work tube is not supplied as an integral part of the furnace and therefore needs to be ordered with the furnace as it is an essential accessory.
'B' type Thermocouple is used in these furnaces.
Over temperature protection is fitted as a standard.
High end Microprocessor PID controller is used in these models.
These models are supplied as separate control console remote from furnace, separated by two meters of flexible inter-connecting cable.
Phase angle fired thyristor unit operating in conjunction with a low voltage secondary isolating transformer providing the correct operating parameters for the heating elements.

Work tubes of various materials, lengths and diameters for use in the furnace.
The work tubes are available for containment of atmosphere or protection against process contaminants.
A variety of trile flange gas tight end seals for work tubes to allow processing under gas atmospheres.
Multi segment, multi program storage controllers.
Thermal radiation plugs.

Specifications

Model	Max Temp (°C)	Max Cont (°C)	Tube Diameter (ID) (mm)	Heated Length (mm)	Nominal Power (kW)	Volts	Phase	External Dimensions (mm) H x W x D	Net Wt. (kg)	Worktubes (ID x Length) (mm) Short	Worktubes (ID x Length) (mm) Long
TSV175/50/200	1750	1750	50	200	8.3	230	1	1525x940x1000	100	50x900	50x1200
TSV175/75/350	1750	1750	75	350	12.0	400	3	1600x940x1000	120	75x1000	75x1350
TSV175/110/350	1750	1750	110	350	12.0	400	3	1600x940x1000	145	110x1000	110x1500